Paint Protection Film (PPF)
- Coverage
- Full Car
- Material
- Nano TPU
- Thickness
- 8.5 mil
- Gloss
- 93 GU
- Warranty
- 5 Years
KL Tint Studio
Vanguard Shield Synergy
Full-car Premium film. Body coating on top.
Full Car PPF Premium at 8.5 mil across major painted panels, finished with Basic ceramic coating on body and lights.

PPF + Ceramic Coating
Full Car PPF Premium + Basic ceramic coating — whole-vehicle chip defence with gloss on body and lights.
Full Car film stops chips and wash abrasion beyond the nose. Basic ceramic coating adds gloss and easier washing on body and lights — without paying for higher coating tiers you may not need yet.
Clear Paint Protection Film covers the full painted body — tap a hotspot to see each covered zone.

Basic Package covers full body and lights — tap a hotspot to see what gets coated.

Vanguard Shield Synergy is Full Car PPF Premium with Basic ceramic coating — whole-vehicle chip defence with a thicker clear film, finished with body and light coating for gloss.
Problems this helps solve

Sides, doors, and rear panels take damage too. Full Car PPF Premium puts thicker clear film on major painted panels so debris meets film before paint.

With Full Car film, droppings and sap land on clear film across roof, doors, and sides — wipe them off instead of living with etched marks.

Full-car film takes wash abrasion first. Basic ceramic coating on top helps the finish stay glossier and easier to clean.
What you get

Small swirl marks on filmed panels can soften with heat or warm water — so the whole car stays fresher looking longer.

Basic ceramic coating on body and lights sits over Full Car PPF so water beads and grime releases faster after rain.

You leave with Full Car PPF Premium (8.5 mil) on major painted panels, plus Basic ceramic coating in the same package.
Before you book Vanguard Shield Synergy, come watch three short demos at our branch. We use a film sample — not your car — so you can see chip defence, self-heal, and water beading with your own eyes.
Available at Kota Damansara, Setia Alam, Maluri Cheras, and Puchong.
01
Stone chip demo
See how PPF takes the hit — not your paint
02
Self-heal demo
Light swirls can fade with heat
03
Water-bead demo
Easier cleaning and less water spotting

Demo 01 · Shop impact tester
See how PPF takes the hit — not your paint
We fire gravel at a PPF sample in our shop tester while you watch. You see chips stop on the film first — the same kind of road grit your bumper faces every day.
What you'll see: The film holds. Paint underneath stays protected.

Demo 02 · Scratch + warm heat
Light swirls can fade with heat
We make a light swirl on the film sample, then warm it. You watch the mark fade as the film surface recovers — so everyday wash marks don’t have to stay forever.
What you'll see: Light marks close up after heat.

Demo 03 · Water drop / wipe test
Easier cleaning and less water spotting
We drop water on the protected surface so you can see it bead instead of spreading. That means faster washes and less stubborn water marks after rain.
What you'll see: Water beads up and wipes off clean.
Self-heal helps with light surface swirls — not deep cuts. Water beading makes washing easier — it doesn't replace normal car care. The stone demo shows how film protects a sample panel; real road debris can vary by speed and size.

5 Years
Covers yellowing, cracking, and adhesive failure per the certificate terms issued after install.
1 Year
Ceramic coating warranty with 1x complimentary maintenance visit. Certificates issued after install.
Avoid automatic washes for the first week after install. Hand wash with pH-neutral soap. Warm sun or warm water helps light PPF swirl marks self-heal. Your coating includes one complimentary maintenance visit within the warranty period.
PPF and ceramic coating specs for this package — shown separately below. Coverage, lab figures, and warranties match what we install.
Film family Protex ARES · Film code ARES-Shield · 8.5 mil Premium
| Film thickness | 8.5 mil ±3% |
|---|---|
| Base film (TPU) | 170 µm |
| Top coating | 20 µm |
| Adhesive (PSA) | 28 µm |
| Overall thickness | 360 µm ±3% |
| Gloss | 93–95 GU |
| Tear resistance | 66 N |
| Puncture resistance | 19.4 N |
| Finished elongation | ≥ 341% |
| Anti-yellowing (QUV 6,000 h) | ΔE ≤ 3 |
| Chip resistance (SAE J400) | Pass |
| Scratch repair | Rapid thermal healing |
| Warranty | 5 Years |
Basic Package nano ceramic coating
| Type | Nano Ceramic |
|---|---|
| Hardness | 9H |
| Particle size | 80 nm |
| Thickness | 10-15 Micron |
| Maintenance | 1x free |
| Warranty | 1 Year |
Named materials behind this package: certified TPU film cores for PPF, plus CARPRO nano-ceramic chemistry for the coating. Strong protection now, clearer paperwork to match.
The tough clear layer that flexes with your panels, stands up to stone hits, and resists yellowing in Malaysian sun.
Independent testing confirmed clean removal across our film variants — so the film protects paint without leaving sticky residue when it comes off.
Clear UV-stable TPU resin (85–90 Shore A) used in our LUX film line — built for outdoor protective films with strong stretch and lasting clarity.
Nano-ceramic coating chemistry from CARPRO — the makers of CQUARTZ — for deep gloss, water beading, and easier washing on painted panels.
Book a bay at any of our four Klang Valley branches, or message us on WhatsApp for a quick fit check on your car.