Window film
- Film
- Sputter HD Metallic
- UV
- up to 99%
- IRR
- up to 95%
- TSER
- up to 76%
- Warranty
- 5 Years
KL Tint Studio
Diamond Package
Sputter HD metallic. Deeper tint, strong rejection.
Diamond Package Sputter HD Metallic film — deeper look, high IRR, and durable metallic-layer performance.

Car Window Tint
Sputter HD Metallic full-car tint with custom JPJ-legal VLT shades — heat, glare, and UV defence in one visit.
Diamond uses Sputter HD Metallic film for drivers who want a deeper look with strong heat and UV performance.
Pick a Visible Light Transmission (VLT) shade per window. Higher % = lighter film. Front glass must stay JPJ-legal.

Front windscreen · 70% VLT · JPJ min 70%
Window
VLT shade
JPJ quick reference
Diamond Package is JPJ-approved Sputter HD Metallic window tint. Diamond uses Sputter HD Metallic film for drivers who want a deeper look with strong heat and UV performance. Here’s the everyday stress it helps with, and what walks home with you.
Problems this helps solve

Afternoon heat cooks the cabin through bare glass. Diamond Package rejects up to 95% IRR so the cabin stays more manageable after parking or highway runs.

Low sun and wet roads throw glare into the cabin. Legal VLT shades on this package cut glare while keeping front glass road-legal.

Diamond Package blocks up to 99% UV — helping protect passengers and slowing fade on dashboards and seats.
What you get

We install with legal front VLT options and darker rear privacy if you want it — confirmed before the film goes on.

This package uses Sputter HD Metallic. Published UV, IRR, and TSER figures match what we quote on this page.

Mix lighter front glass with darker rear side and rear windscreen — use the VLT picker on this page, then lock shades when you book.
Meter readings taken at the branch, in front of you — same Live Proof at Kota Damansara, Setia Alam, Maluri Cheras, and Puchong. For Diamond Package, ask for the film sample test before you book.

01 · Heat rejection demo · 940 nm & 1400 nm
Infrared heat rejection measured on a film sample — and again on your glass
KL Tint Studio runs a live infrared heat rejection demo at every branch. Readings are taken at 940 nm and 1400 nm on a film sample before you buy, then on the installed glass after tinting — not brochure numbers alone.
Watch for: Each IR wavelength stays on its own line on the Live Proof card.

02 · UV meter
UV meter reading that slows cabin fade — not a medical claim
We run a live ultraviolet rejection test with a UV meter on the film sample and on the installed glass. UV rejection helps slow fading inside the cabin. Package “up to” UV figures stay on the datasheet; this card shows the meter reading from the visit.
Watch for: Ultraviolet rejection written on the Live Proof card for this visit.

03 · TSER meter
Overall solar energy rejection on its own TSER meter
Total solar energy rejection is read on a dedicated TSER meter during Live Proof. Sample-film and installed-glass readings are written separately. Published package TSER on this site is stated as “up to”; the Live Proof card shows what the meter read that day.
Watch for: TSER stays on its own line — separate from IRR and UV.
5 Years
Covers bubbling, peeling, and adhesive failure under standard aftercare. Certificate issued after install.

Keep your invoice for warranty and VLT reference.
Do not roll windows down for the first 3–7 days. Avoid washing for 3–5 days; then use a soft cloth and non-abrasive cleaner near film edges. Keep your invoice for warranty and VLT reference.
Shade-level optical data for Diamond Package. Pick a shade by visible light (VLT) — that is what goes on the invoice. Film code is for the installer and this data sheet. IRR is not TSER; UV rejection slows cabin fade and is not a medical claim. Website package figures are stated as “up to.”
Film
Sputter HD Metallic
UV ceiling
99%
IRR ceiling
up to 95%
TSER ceiling
up to 76%
Shade cards · tap a VLT
70% visible light
Film code · KLTS-D70
| Visible light (how much light comes through) | 70% |
|---|---|
| Visible light reflectance | 5% |
| Ultraviolet rejection | 99% |
| Total solar energy rejection | 58% |
| Infrared rejection (950 nm) | 95% |
| Infrared rejection (1400 nm) | 98% |
| Thickness | 2 mil |
| Scratch resistant | 3H |
| Haze value | 0.43% |
| Warranty | 5 years |
Live Proof meter readings from a visit are written separately from these shade-card figures.
Every tint package on this page uses JPJ-approved films with published VLT options for front and rear glass — so comfort and legality stay on the same invoice.
Front windscreen from 70% VLT and front sides from 50% VLT — we help you pick legal shades before install.
This package installs Sputter HD Metallic — UV, IRR, and TSER figures match the datasheet on this page.
Mix lighter front glass with darker rear privacy — use the VLT picker above, then confirm shades when you book.
Book a bay at any of our four Klang Valley branches, or message us on WhatsApp to lock JPJ-legal VLT shades for your car.